One step closer

Written by ralph on 15/02/2015. Posted in Boot storage build, Ralph's blog

Having been allowed out of the kitchen, for good behaviour and managed to negotiate a shore pass from SWMBO, I have made a bit more progress with the hatches.

Today I managed to get the black film wrap and edging fixed on one side.  I also modified the brackets on the inside to fit a rotating LED strip light to light up the inside of the hatch.



I just have the hinge covers to do, finish off the other side and then the job will be done.  The step by step article is nearly complete and will be uploaded in the next few weeks.

Having discovered that the edge seal I fitted around the hatches has the same profile as the rear door I also replaced all of this.  A replacement from Land Rover is £75+.  Using the continuous strip, it only cost £25 :).

Leave a Reply



Trackback from your site.