Days to go : 196
After a bit of fiddling I finally refitted the original (LR) solenoid that I took out over a year ago. After a good clean up with contact cleaner and a squirt of WD40 it was fitted and is working perfectly.
As I mentioned earlier the solenoid is in a really awkward position on the rear of the pump surrounded by pipework and bracketry. It is impossible to use a socket or ring spanner and a normal open ended is too 'fat' and long to fit easily and swing sufficiently. I don't know what everyone else uses but I have modified a 24mm spanner which I find works perfectly. I have attached a image here to show it.
I finally managed to get the awning to sit straight and level and have now completed an articles outlining how it is fitted here.
Tomorrow I hope to make some progress with the fresh water system.
